How to Find the Waste Gate Solenoid Location on a 2016 Ford Escape

Introduction

If your 2016 Ford Escape is having problems with the waste gate solenoid, then you need to know its location. This way, you can replace it quickly and get your vehicle running again. This article will provide you with the information that you need to locate the waste gate solenoid on a 2016 Ford Escape.

Step 1: Locate the Engine Cover

The first step is to locate the engine cover. The engine cover is located on the passenger side of the engine bay. It is a large black plastic cover that is secured with several bolts. Remove the bolts and set the engine cover aside.

Step 2: Locate the Waste Gate Solenoid

Once you have the engine cover removed, you will be able to access the waste gate solenoid. It is located on the driver’s side of the engine, near the throttle body. It is a small black plastic box with two electrical connectors attached to it.

Step 3: Remove the Waste Gate Solenoid

The next step is to remove the waste gate solenoid. Disconnect the electrical connectors and then unscrew the mounting bolts. The waste gate solenoid should then come off easily.

Step 4: Install the New Waste Gate Solenoid

Once you have the old waste gate solenoid removed, you can install the new one. Simply connect the electrical connectors and then screw the mounting bolts back in place. Make sure that the waste gate solenoid is securely mounted before you put the engine cover back on.

Conclusion

Finding and replacing the waste gate solenoid on a 2016 Ford Escape is not difficult. Just remember to locate the engine cover, locate the waste gate solenoid, remove the old one, and then install the new one. With this information, you should be able to replace the waste gate solenoid on your 2016 Ford Escape quickly and easily.